A basic introduction:

　　1: This machine adopts a new generation of digital display computer control system, high slicing accuracy, fast cutting speed, 4 kilometers per hour.

　　2: This machine uses electric eye tracking technology, in addition to cutting ordinary non-woven fabrics, it can also cut color non-woven materials, cut films and other composite materials.

　　3: The machine uses low power (configuration 2 kW), power saving, and noise floor.

　　4: Reasonable shape design, small size, and less floor space.

　　5: The unwinding diameter of this machine is 800MM, the cutting width is 1150MM, and the cutting length is 10-1500MM.

　　 Two. The performance structure and characteristics of the equipment:

　　 1. The working principle of the equipment: feeding → automatic correction → wrinkle removal by wrinkle-removing aluminum roller → stacker folding →

　　Ultrasonic automatic stitching→automatic folding→pneumatic punching→photoelectric tracking→ultrasonic stitching→photoelectric tracking or fixed-length cutting→fully automatic completion.

　　2. The width of the raw material of the equipment is 1200mm. (Can be customized according to customer requirements).

　　 3. The equipment is equipped with a stepless speed change device, an automatic counting device, and an automatic deviation correction device.

4. The equipment is equipped with 3 sets of high-quality ultrasonic, with strong power and strong bonding fastness. It can work continuously and intermittently for a long time. 2 sets of 50mm are used for punching and free control of ultrasonic waves, which can prolong the service life of ultrasonic waves. . The seam pattern can be customized according to customer requirements. The size is accurate and more user-friendly.

　　5. The transmission part of the equipment adopts an integral connection type to ensure synchronization of tension, stable conveying, neat stitching, convenient adjustment, no loss, and high yield.

　　6. The equipment is equipped with microcomputer PLC combined with high-quality inverter control. The bag length is set and cut immediately, no need to adjust the empty running, one step in place, saving time and cloth.

　　7. The size of the bag can be adjusted, the width of the bag can be adjusted within 600mm, and the length can be adjusted arbitrarily through the computer control system.

　　 8. The steel frame of the whole machine is welded with high-quality national standard channel steel, all electrical appliances are made of Chint, screws, nuts and other materials are all national standard accessories. The electrical wiring specifications are reasonable, the machine is beautiful and easy to run, and it runs smoothly. It is the best choice for the production of non-woven bags!

　　 Three, the technical parameters of the equipment:

　　 Equipment model: AH-1200

　　 Production speed: 30-80 pcs/min. (It depends on the fabric weight and bag size, 30 pcs for thick material and 80 pcs for thin material)

　　 Rated voltage: 220V

　　 Rated frequency: 50Hz

　　Total power: 5.0kw

　　 Dimensions: length 3500mm wide 1200mm high 1200mm

　　Equipment weight: 1500kg

　　 Hole size: fixed, if you need to adjust, you can re-make the punching die, usually 30mm-60mm, the hole needs to be equipped with an air compressor

Order immediately

To order products:Non-woven bag perforated cross-cutting machine

Submit